Multimedia


Here you will find everything about computer-controlled LED screens/walls/displays and accessories

TOPSELLER



Topseller

ADJ 3D Vision Plus
The 3D Vision Plus is a hexagonal shaped LED panel with stunning 3D visual effects when used in multiples. Designed for nightclubs, lounges, bars, entertainment centers, stages and mobile entertainers. The 3D Vision Plus has a 4-Button menu system with a digital display. It may be controllable via DMX using a DMX to RJ45 adapter. It can also be used with EZ Kling interface for Artnet and KlingNet, LED Master control. Link multiple panels together via powerCon input/output with RJ45 ports for data linking. Panels lock together with an easy to use quick release panel lock. Rigging bars are also available for dead hang installation (M10 thread on the rear for a Pro Clamp so units can easily be fastened to truss or 2-inch pipe).Measuring 15.8” x 15.8” (400mm x 400mm), the face of each 3D Vision Plus panel is covered with a frosted white acrylic panel which diffuses the light from the 72 3-in-1 RGB LEDs beneath. This creates an even spread of light within each of the three sections and gives the 3D vision a wide 180-degree viewing angle.Thanks to the 3D Vision Plus’ modular design, panels can be used in isolation or linked together at any of their six sides. This means that large 3D-effect LED surfaces can be created in unlimited shapes and configurations. For example, you could use a single line of panels attached to the front of a truss pillar to spice up a stage set, while a matrix of panels could be used to create an impressive backdrop.Light Source:72 Pieces 3-in-1 RGB LEDsBeam Angle: 180 DegreesFeatures:Distinctive hexagonal-shaped LED panel is divided into three separate sections in a way that gives it a unique three-dimensional appearance.Safety hook on rear panelM10 thread on rear panel to connect a clamp to secure to a pipeWall mount slots on rear panelControl:3 Operating Modes: Sound Active Mode (with Sound Sensitivity Adjustment), Auto Run Mode (16 Programs with Speed Adjustment), DMX Control3 DMX Channel Modes: 3, 9, and 13 Channel ModeMaster/Slave Set Up4-Button Menu with Digital DisplayConnections:powerCON In/Out to daisy chain powerRJ45 In/Out DMX protocolElectrical:Input Voltage: AC 100-250V, 50/60HzDimensions/Weight:Dimensions (LxWXH): 3.16” x 15.93” x 13.80” / 80.5 x 404.7 x 350.7 mmWeight: 6 lbs./ 2.74Kgs.Approvals:ETL, ETLC, CE Accessories (sold separately): 3D Vision PL: Metal panel brackets used to lock 3D Vision Plus panels together3D Vision RB1: Metal rigging barPLC3: 3-foot powerCON power link cablesMPC10: powerCon power cordmyDMX 3.0: DMX control softwareACRJ453PFM: RJ45 to 3-pin male DMX adapter

€199.00*

Immediately available or ready for collection
ADJ 3D Vision RB1
RIGGING BAR FOR 3D VISION. MUST USE THIS RIGGING BAR WHEN HANGING 3D VISION PANELS FROM TRUSS. QUICK RELEASE PANEL LOCKS MUST BE USED TO LOCK THE PANEL TO THE RIGGING BAR

€15.00*

Immediately available or ready for collection
ADJ AV4 Outdoor Video Wall
SPECIFICATIONS:Pixel Pitch: 4.81mm (0.19”)LED Configuration: 3-in-1 SMD1921 LEDPixel Density: 104x104; 43264 (dot/m2)Panel Size :19.75” x 19.75” x 4” / 500 x 500 x 100mmModule Quantity: 2Module Size: 250 x 500mmModule Resolution: 52 x 104 pixelsPanel Weight: 20 lbs. / 9kg. MECHANICAL RATINGS:Surface Flatness: Gaps

€779.00*

Immediately available or ready for collection
ADJ MCTRL300 Controller for AV6X and AV3
The MCTRL-300 is a controller for ADJ's AV6 LED video panels. It features one DVI signal source input and two RJ45 pixel-data outputs for 2 independant screens.The controller is easily configured via USB and it will drive up to 1.3 million pixels supporting the following resolutions: 1280 x 1024, 1024 x 1200, 1600 x 848, 1920 x 712, 2048 x 668. The MCTRL-300 is an essential accessory for the AV6 video panels.Specifications- Control Mode: Synchronous Display with Control PC by DVI - Frame Update Frequency: 50-60Hz- Scan Mode: 1/12 Duty- Refresh Rate: 1200Hz - Support Input: Composite, S-Video, Component, VGA, DVI, HDMI, HD_SDI to DVI- Control Distance: Ethernet Cable 120m- Supported Modes: 1280 x 1024, 1024 x 1200, 1600 x 848, 1920 x 712, 2048 x 668- Brightness Correction: Pixel, Module, Cabinet- Requires a computer (sold separately)- 2 separate RJ45 CAT6 outputs for 2 AV-6 screens (mirrored or independant content)

€399.00*

Immediately available or ready for collection
ADJ AV3 8pcs Flight Case
Touring Case for 8 x AV3 video panels8 handles4 castor dishesDimensions (WxLxH) : 600mm x 1200mm x 596mm (w/o wheels)Weigth : 47,60kgl

€699.00*

delivery time 5 days
ADJ TRU1PCOA True1 to Powercon
The TRU1PCOA is a 1ft/30cm, 12AWG, IP20 rated powerCON TRUE1 to standard powerCON output power adapter. This adapter was designed for production use and for those who already own standard powerCON cables and extensions who aren't ready to invest into powerCON TRUE1 cables and extensions. The TRU1PCOA adapter can be used at your fixtures power output side while using your standard powerCON cables for all other power connections. The TRU1PCOA consists of (1) Male powerCON TRUE1 (Neutrik NAC3MX-W), (1) White powerCON (Neutrik NAC3MPB-1) cable mount connector and a clear heat shrinkable sleeve so each unit can labeled. The powerCON TRUE1 is a locking connector with breaking capacity (CBC), i.e. it can be connected or disconnected under live load. The standard powerCON is a connector without breaking capacity, i.e. the standard powerCON should not be connected or disconnected under load or live!Specifications 1ft/30cm long end to end12AWG cableOriginal Neutrik branded connectorsIP2020A @120VAC; 16A @250VACEasy and reliable twist lock systemExtremely robust and durableUL recognized components

€32.00*

Immediately available or ready for collection
ADJ 3D Vision Encoder
- Needed to set up DMX adress and channel modes on 3D Vision Panel- Multivoltage Power Supply 100V-240V 50/60Hz included- Dimensions : (W x L x H): 100mm x 142mm x 40mm / 3.94" x 5.59" x 1.57"- Weight: 0,32kg / 0.7lbs

€69.00*

Immediately available or ready for collection
ADJ AV6X Video Wall
The AV6x is an affordable 6mm LED Video panel designed for nightclubs, bars, bands, mobile entertainers, event productions and houses of worship. cETL Approved.Specifications- Pixel Pitch: 6.0mm (0.25”)- LED Configuration: 3-in-1 SMD2121 LED- Pixel Density: 96x96; 27,777 per square meter - For indoor use only- Size: 576 x 576 x 75mm / 22.75” x 22.75” x 3”- Module Quantity: 4- Weight: 23lbs. / 8.15Kg MECHANICAL RATINGS:- Surface Flatness: Gaps

€689.00*

Immediately available or ready for collection
Fast-Setup Screen Pro
Robuste, tragbare Projektionsleinwand - 165" - 16:9 - 3660 x 2050 mm (BxH)Der DMT Fast-Setup Screen Pro ist eine stabile, tragbare Projektionsleinwand für die Front- und Rückprojektion. Das geniale Aluminiumgestell lässt sich schnell und ohne Werkzeug aufbauen.Der Fast-Setup Screen Pro wird mit zwei Leinwänden geliefert - eine für die Frontprojektion und eine für die Rückprojektion. Die Leinwände sind zum optimalen Schutz einzeln verpackt. Für den sicheren Transport ist ein Flightcase im Lieferumfang enthalten.- Stabile Aluminiumkonstruktion- Mit Leinwänden für die Fron- und Rückprojektion- Schneller, einfacher Aufbau- Flightcase für den sicheren Transport- Kein Montagewerkzeug erforderlich

€2,099.00*

delivery time 14 days
ADJ CAT6 IP 1m

€14.90*

Immediately available or ready for collection
ADJ 3D Vision Plus, B-Stock
The 3D Vision Plus is a hexagonal shaped LED panel with stunning 3D visual effects when used in multiples. Designed for nightclubs, lounges, bars, entertainment centers, stages and mobile entertainers. The 3D Vision Plus has a 4-Button menu system with a digital display. It may be controllable via DMX using a DMX to RJ45 adapter. It can also be used with EZ Kling interface for Artnet and KlingNet, LED Master control. Link multiple panels together via powerCon input/output with RJ45 ports for data linking. Panels lock together with an easy to use quick release panel lock. Rigging bars are also available for dead hang installation (M10 thread on the rear for a Pro Clamp so units can easily be fastened to truss or 2-inch pipe).Measuring 15.8” x 15.8” (400mm x 400mm), the face of each 3D Vision Plus panel is covered with a frosted white acrylic panel which diffuses the light from the 72 3-in-1 RGB LEDs beneath. This creates an even spread of light within each of the three sections and gives the 3D vision a wide 180-degree viewing angle.Thanks to the 3D Vision Plus’ modular design, panels can be used in isolation or linked together at any of their six sides. This means that large 3D-effect LED surfaces can be created in unlimited shapes and configurations. For example, you could use a single line of panels attached to the front of a truss pillar to spice up a stage set, while a matrix of panels could be used to create an impressive backdrop.Light Source:72 Pieces 3-in-1 RGB LEDsBeam Angle: 180 DegreesFeatures:Distinctive hexagonal-shaped LED panel is divided into three separate sections in a way that gives it a unique three-dimensional appearance.Safety hook on rear panelM10 thread on rear panel to connect a clamp to secure to a pipeWall mount slots on rear panelControl:3 Operating Modes: Sound Active Mode (with Sound Sensitivity Adjustment), Auto Run Mode (16 Programs with Speed Adjustment), DMX Control3 DMX Channel Modes: 3, 9, and 13 Channel ModeMaster/Slave Set Up4-Button Menu with Digital DisplayConnections:powerCON In/Out to daisy chain powerRJ45 In/Out DMX protocolElectrical:Input Voltage: AC 100-250V, 50/60HzDimensions/Weight:Dimensions (LxWXH): 3.16” x 15.93” x 13.80” / 80.5 x 404.7 x 350.7 mmWeight: 6 lbs./ 2.74Kgs.Approvals:ETL, ETLC, CE Accessories (sold separately): 3D Vision PL: Metal panel brackets used to lock 3D Vision Plus panels together3D Vision RB1: Metal rigging barPLC3: 3-foot powerCON power link cablesMPC10: powerCon power cordmyDMX 3.0: DMX control softwareACRJ453PFM: RJ45 to 3-pin male DMX adapter

€144.00*

Immediately available or ready for collection
ADJ Novastar VX4S Controller for AV6X and AV3
The new NOVASTAR VX4S™ is a professional and user friendly LED display controller and a powerful front end processor that supports multiple signal formats including DP / HDMI / VGA / DVI / CVBS / SDI, and up to 1920 x 1200p @60Hz input resolution, includes (4) RJ45 outputs for up to 2.6 million pixels of LED control, and supports Nova’s new generation point-by-point correction technology.NOVASTAR VX4S™ is compatible with the ADJ AV6, AV6X and AV3 video panels. FEATURES:User Friendly LED Display ControllerPowerful Front End ProcessorUp to 1920 x 1200 p @60Hz Input ResolutionMultiple Video Signal Format SupportNew Generation Point-By-Point Correction TechnologyCascade Multiple Units Together Via USBRack Mountable Aluminum Enclosure (screws not included)CONTROL / CONNECTIONS:(1) RJ45 LAN for IP Based Control(4) RJ45 Outputs for up to 2.6 million Pixels of LED Control(2) USB Type A and (2) USB Type B Ports (1 set on each side)(1) 1/8 inch (3.5mm) Audio InputVideo Input: (1) DP / (1) HDMI / (2) VGA / (1) DVI / (2) CVBS / (1) SDIVideo Output: (1) DVI Loop / (1) DVI / (1) VGA / (1) SDI LoopLocking IEC Power InputSIZE / WEIGHT:Length: 19.0” (483mm)Width: 10.8” (275mm)Height: 1.8” (45mm)Weight: 5.6 lbs. (2.55 kg)ELECTRICAL:AC 100-240V - 50/60Hz - 0.65AMax Power Consumption: 16W INCLUDED CABLES (1 each):DP, VGA, USB, HDMI, DVI, CAT5, Power

€2,149.00*

delivery time 5 days
ADJ AV3/AV4 RSB
Adapter for AV3. Used when wanting to create a perfectly flat wall.

€6.00*

delivery time 14 days
ADJ Touring Case für 8x VS3IP
Touring Case for 8 x VS3IP Video PanelsSpecifications:Penn Elcom Hardware8 handles9mm Plywood4 castor dishes2 butterfly locksDimensions & Weight:Dimensions w/o wheels (L x W x H) : 1040 x 640 x 675mmDimensions with wheels (L x W x H) : 1040 x 640 x 800mm

€929.00*

delivery time 5 days
ADJ TRU1PCIA Powercon to True1
The TRU1PCIA is a 1ft/30cm, 12AWG, IP20 rated powerCON TRUE1 to standard powerCON input power adapter. This adapter was designed for production use and for those who already own standard powerCON cables and extensions who aren't ready to invest into powerCON TRUE1 cables and extensions. The TRU1PCIA adapter can be used at your fixtures power input side while using your standard powerCON cables for all other power connections. The TRU1PCIA consists of (1) Female powerCON TRUE1 (Neutrik NAC3FX-W), (1) Blue powerCON (Neutrik NAC3MPA-1) cable mount connector and a clear heat shrinkable sleeve so each unit can labeled. The powerCON TRUE1 is a locking connector with breaking capacity (CBC), i.e. it can be connected or disconnected under live load. The standard powerCON is a connector without breaking capacity, i.e. the standard powerCON should not be connected or disconnected under load or live!Specifications1ft./30cm long end to end12AWG cableOriginal Neutrik branded connectorsIP2020A @120VAC; 16A @250VACEasy and reliable twist lock systemExtremely robust and durableUL recognized components

€32.00*

Immediately available or ready for collection
ADJ 3D Vision PL
QUICK RELEASE PANEL LOCK FOR 3D VISION PANELS. USED TO LOCK MULTIPLE PANEL TO EACH OTHER AND TO THE RIGGING BAR

€4.90*

delivery time 5 days
Powercon link cable 1m

€21.00*

Immediately available or ready for collection
Roland V-1HD HD Video Mixer
The V-1HD allows easy connection and convenient switching of video cameras, smartphones, computers, tablets, Blu-ray players and other HDMI video sources with a push of a button or T-fader. The V-1HD supports professional compositing effects such as picture-in-picture and keying for inserting graphics and titles as well as working with green screens ideal for use in news broadcasters or company-owned training facilities.Key FeaturesSupport for video cameras, action cameras, smartphones, tablets and other HDMI devices4x HDMI inputFull HD (1080p)Simple user interfacePicture-in-picture and split functionsTwo EFFECTS controls for unique visual representationsIntegrated 12-channel audio mixing consoleHardware control for easy operation2x HDMI outputRemote control via USB or MIDI connectionSoftware control via V-1HD RCS application for Mac, PC and iPad

€799.00*

delivery time 14 days
ADJ AV3RB1 rigging bar for AV3
Single panel rigging bar for the AV3. Up to 20 panels maximum vertical hang.

€179.00*

delivery time 5 days
ADJ AV6RB2 rigging bar for AV6X
Single panel rigging bar for the AV6X. Up to 20 panels maximum vertical hang.

€179.00*

delivery time 5 days

TOP MARKEN


Thumbnails
Thumbnails