Effect Machines


Effect machines are devices that create a special effect on stage, at an event or in your party room. For example: fog, haze, snow, bubbles or foam, wind and confetti rain. Various effects to heat up the party atmosphere or to create a certain atmosphere in the theater or on the stage... [ More ]

TOPSELLER



Topseller

Pumpe for Z-1020
Pump for Antari Fogmachine X-310, X-310II, Z-1000II, Z-1500II, Z-1200II, Z-3000II, W-510, W-515, W530, M-5, M-8, M-10, IP-1500

€33.55*

Immediately available or ready for collection
Antari PM-1 pan motor for S-500
Pan motor ffor Antari snow machine S-500EMotor with 120° degrees pan to increase coverage area.DMX512 connector: 3-pol. XLRCan be attached with clamp or hook via omega support.Measurements (LxWxH): 169 x 154 x 150 mmWeight: 1,9 kg

€336.00*

Immediately available or ready for collection
Pump for snower Antari S-100, S-100II and S-200 (M24020), 240V
Pumpe für S-100, S-100II, S-200 und SM-110 SchneemaschineType Antari und Acme

€65.00*

delivery time 14 days
Heater for W-530 Antari fog machine (230V)
Heater for W-530 Antari fog machine (230V)Power 1500 Watt

€312.00*

Delivery time from 8 to 10 weeks!
DMX PC Board for Z-1200II Antari fog machine
3-pol DMX Anschluß5V Versorgungsspannung

€29.00*

Immediately available or ready for collection
Nozzle for Heater for F80Z

€6.20*

Immediately available or ready for collection
PC Board for Antari B-100X bubble machine
Ersatzhandsender für Remotecontrol, zum ein- und ausschalten der Seifenblasenmaschinen.

€18.08*

Immediately available or ready for collection
1 kg Paper-Confetti (Confetti size 2 x 6 cm) blue
1 kg paper-confettiConfetti size: 2 x 6 cmblue

€7.20*

Immediately available or ready for collection
Battey clip for 9-Volt Battery, vertical
Battery clip for connecting a 9 volt block battery or battery holder, vertical. Connection wires: approx. 150 mm

€0.50*

Delivery time from 8 to 10 weeks!
Copper tube with nuts for Z-1200II fogger
Kupferrohrdurchmesser 4,8mm + 2x Nuts (Muttern mit Messingdichtring)

€9.50*

Immediately available or ready for collection
Fan Group for Antari F-3
Fan for Antari F3 Fazer.

€198.00*

Immediately available or ready for collection
Pumpe for W-515
Pump for Antari Fogmaschinen X-310, X-310II, Z-1000II, Z-1500II, Z-1200II, Z-3000II, W-510, W-515, W530, M-5, M-8, M-10, IP-1500

€38.39*

Immediately available or ready for collection
Pump for fogger X-515, X-510, X-530
Pump for Antari Fogmachine X-310, X-310II, Z-1000II, Z-1500II, Z-1200II, Z-3000II, W-510, W-515, W530, M-5, M-8, M-10, IP-1500

€38.39*

Immediately available or ready for collection
Nozzle EntourSnow
Nozzle EntourSnow

€9.90*

delivery time 14 days
Pump for FOG 1000, Antari F-1, ADJ Entourage, Entour Venue
Pumpfor: FOG 1000, Antari F-1, ADJ Entour Venue, Entourage

€29.90*

Immediately available or ready for collection
ADJ Bubbletron XL
Portable high output bubble machine with durable plastic casing and large, EZ-Access front fluid tank. Creates hundreds of bubbles per minute.Portable high output bubble machine - creates hundreds of bubbles per minute Extra-large, durable plastic casing with EZ-Access front fluid tank Large dual high velocity fans makes bubbles rise quickly in the air ON/OFF switch on rear of unitCarrying handleMost types of bubble liquid acceptablePower Consumption: 37W @ 120V / 14W @ 230VTank Capacity: 2 LiterFluid Consumption Rate: 40ml/ per minuteVoltage: AC120/60Hz or 230V/60HzDimensions (LxWxH): 359x266x278mmWeight: 9 lbs. / 3.7 kgs.Includes 9-foot /3M On/Off Wired Remote Control

€155.00*

Immediately available or ready for collection
Wireless Control Module 433 MHz for M-5/M-10(Pro)
Antari X-30 Pro radio moduleFunctions: - DMX address - Interval 1-300 seconds - Fog time interval - Fog fluid flow adjustmentTimer function, volume function, manual operation, flow controlIncluding W-1 remote control

€159.00*

Immediately available or ready for collection
Smoke liquid flavour tutti frutti
Instruction:Put 1/2 bottle of the smoke liquid flavour into one 5 l can smoke fluid (20ml)

€2.90*

Immediately available or ready for collection
Heater for Z-3000III Antari fog machine (230V)
Heater for Z-3000III Antari fog machine (230V)

€312.00*

Immediately available or ready for collection
10 m extension cable for SM-110XLR 3 pol. female/male
Controll line XLR plug 3-pol to XLR female 3-pol, extension cable for SM-110

€15.96*

Immediately available or ready for collection

TOP MARKEN


Thumbnails
Thumbnails
We have 3 types of fog machines:

> FOG MACHINES
A fog machine basically consists of a pump that pumps the fog fluid from a container into the heating element. The heating element and a controller. The fog fluid is vaporized in the heating element and powerfully ejected from the nozzle due to the resulting pressure. This can be up to 15m with large fog machines. This creates a haze or a dense fog for each fog liquid.
Fog machines with LED lighting are also new. Coloring the fog can create great effects.
A CO2 effect can also be created with a fog machine by using a CO2 fog fluid.

> FAZER
Basically, the Fazer works like a fog machine. In addition, the Fazer has a fan that distributes the fog output better in the room. Technically, the Fazer is a smooth, continuous, low-output smoke machine. The fazer thus ensures a fine and thin fog, which allows light effects and lasers in particular to shine with great spatial effects.

> HAZER
The hazer (haze generator) is very similar in effect to a fazer. However, it does not create a dense fog that should be visible as an effect, but an almost invisible haze to support the multidimensional effect of the light show, i.e. to make the light rays visible. Hazers atomize the fluid using a compressor. This is done via the compressor using ultrasound, not via the evaporation of a heating element as is the case with the fog machine, which is why a special hazer fluid is also required.

> GROUND FOG MACHINES
In order to keep the fog on the ground, the fog that is emitted must be cooled. This can be done with ground fog machines with ice, dry ice or a cooling unit. The cooled fog stays on the ground longer due to the thermal effect.
Ground fog can also be created with a dry ice machine. Here the chemical reaction of dry ice with hot water is used. Dry ice (-75 C°) is flushed with hot water and thus quickly melted. As a result, the dry ice converts to the CO2 gas state and creates a fog that glides away from the ground.